Logo Banner

Home
R.O. Theory
Our Products
Related Products
Testimonials 
St Roch II Story
Links
Contact Us

 

Hydraulic Drive R.O. WaterMaker Kit


Proudly made
in the USA

This kit is designed to be hydraulically driven by an existing hydraulic system, or by upgrading to our complete hydraulic system which includes a hydraulic pump for mounting on your main engine or generator set, storage tank/heat exchanger, flow control valve, hydraulic motor with bell housing and coupling to attach to our high pressure R.O. pump, and various hoses and fittings. The R.O. kit comes complete with all necessary items except the mounting brackets to attach the hyraulic pump to the engine. Custom stainless steel mounting brackets are available for Westerbeke generator sets. (This kit does not include additional pulleys for your main engine. However we can custom make these pulleys for you or contact your nearest engine supplier.)

Hydraulic Drive Kit Contents

KIT CONTENTS

  • Standard R.O. high pressure pump with aluminum-nickel bronze (or optional stainless steel upgrade) pump head with liletime limited warranty to original non-commercial marine purchaser.
  • Hydraulic motor, bell housing and coupling to attach to the R.O. pump.
  • 1000 psi certified filament wound fiberglass RO membrane housing with Super Austenitic stainless steel end plugs, mounting brackets and a lifetime limited warranty to the original non-commercial marine purchaser.
  • Stainless steel Control Panel including flow meters, hour meter, stainless pressure gauge, manual stainless regulator valve, three-way selector valve, overload circuit breaker, safety stainless high pressure switch and indicator light.
  • Prefilters (5 and 20 micron) with clear housing & stainless mounting brackets.
  • Thin film, spiral wound 1000 psi, 50,000 ppm high rejection (99.5%), heavy duty RO membrane(s) including one pound of cruising membrane preservative.
  • Safety aluminum-nickel bronze low pressure switch and service wrench.
  • 20' nylon lined high pressure hose with reusable fittings.
  • 10' heavy duty white reinforced feed water hose and fittings.
  • 15' heavy duty red polyethylene brine water discharge tubing and fittings.
  • 15' FDA approved blue polyethylene product water tubing and fittings.
  • 3/8" inline check valve for product water tubing.
  • Miscellaneous fittings, screws, hose mounts, etc.
  • Set of installation diagrams and instructions.
  • Toll Free assistance line for installs or technical support.

DUTY FREE TO CANADA          SIZE OPTIONS              DUTY FREE TO CANADA
SIZE * H.P. SIZE * H.P.
 8 GPH 1 Hp 40 GPH 1 Hp
12 GPH 1 Hp 62 GPH 2 Hp
18 GPH 1 Hp 113 GPH 3 Hp
24 GPH 1 Hp 250 GPH 6 1/2 Hp   
* The above flow rates are based on a TDS of 36,000 ppm at 78 degrees F.
Flow rates are +/-5%


MISCELLANEOUS OPTIONS
Refrigeration compressor150 gpm bilge pump
8" Diameter
Hydraulic pump
D 4 1/4"
W 3 5/8"
H 3 3/8"
Shaft 9/16" dia.
Hydraulic flow control valveHydraulic reservoir &
heat exchanger
ELECTRIC FLUSH KIT
PANEL MOUNTED AUTOMATIC SALINITY MONITOR & TANK/OVERBOARD VALVE
HYDRAULIC FLOW CONTROL VALVE
HIGH PRESSURE WASH DOWN KIT (SALT & FRESH WATER) WITH 25FT. OF 2000 PSI NON MARKING DECK HOSE
12 VOLT D.C. OR 120 VOLT A.C. UV STERILIZER UNIT WITH S/S LINER (FOR SHIP'S TANK)
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS PER CASE OF (30) $60 SAVINGS PER CASE
PORTABLE HAND HELD SALINITY MONITOR
316 STAINLESS STEEL PUMP HEAD (62 GPH MAX.)
UPGRADE S/S PANEL FROM 32 GPH TO 62 GPH CAPACITY
ADDITIONAL MEMBRANE MODULE(S) FOR HIGHER PRODUCTION
HYDRAULIC PUMP, HEAT EXCHANGER/HYDRAULIC RESERVOIR, HYDRAULIC HOSES AND FITTINGS TO INSTALL A COMPLETE HYDRAULIC SYSTEM

Pump & Pre-Filters Hydraulic Motor and RO Pump RO Module Control Panel
Pre-Filters Hydraulic Drive with Boost Pump Reverse Osmosis Membrane Module Control Panel




Website and all contents copyright, © 1996-2016, by AquaMarine, Inc. All Rights Reserved
Please review legal terms and conditions of use by clicking here.

PO Box 55, Deer Harbor, WA 98243-0055 USA
Ph: 1-800-376-3091 or (360) 376-3091 fax: (360) 376-3243
All rights reserved.
 

Email us: aqua2133@me.com

 


Most products are sold duty free to Canadian residents.