Logo Banner

Home
R.O. Theory
Our Products
Related Products
Testimonials 
St Roch II Story
Links
Contact Us


 

AquaMate Semi-Modular & Main Frame R.O. WaterMakers


Proudly made
in the USA

These electrically driven RO systems feature a high efficiency electrical motor, which greatly reduces the starting requirements. As a result, these kits can be operated from either the ship's generator set or from a 2.5 kw squarewave inverter (50 or 60 Hz).

Modular Electric   Modular Electric/Belt Kit
Modular 120 VAC or 12 VDC
(25 1/2" L x 9 1/2"  H x 9 1/2" W)
  Modular S/S 120 VAC or 12 VDC / Belt Drive
(24 1/2" L x 9 1/2"  H x 9 1/2" W)

KIT CONTENTS

  • High pressure pump with aluminum-nickel bronze (or optional stainless steel upgrade) pump head with lifetime limited warranty to original non-commercial marine purchaser. Rubber studded mounting feet for vibration isolation.
  • Custom high efficiency, low starting current, 1 1/2 or 2 hp 120V AC/DC or 1 1/2 hp 12 volt DC electric motor
  • Custom bell housing, (direct couples the high pressure pump to the electric motor) & Delron non-corrosive shaft coupling.
  • 1000 psi certified filament wound fiberglass RO membrane housing with Super Austenitic stainless steel end plugs, mounting brackets and a lifetime limited warranty to the original non-commercial marine purchaser.
  • Stainless steel Control Panel including flow meters, hour meter, stainless pressure gauge, manual stainless regulator valve, three-way selector valve, overload circuit breaker, safety stainless high pressure switch and indicator light.
  • Thin film, spiral wound 1000 psi, 50,000 ppm high rejection (99.5%), heavy duty RO membrane(s) including one pound of cruising membrane preservative.
  • Prefilter (5 micron) with clear housing & stainless mounting bracket.
  • 120/220 volt AC or 12 volt DC boost pump.
  • Safety aluminum-nickel bronze low pressure switch and service wrench.
  • 10' nylon lined high pressure hose with reusable fittings.
  • 10' heavy duty white reinforced feed water hose and fittings.
  • 15' heavy duty red polyethylene brine water discharge tubing and fittings.
  • 15' FDA approved blue polyethylene product water tubing and fittings.
  • 3/8" inline check valve for product water tubing.
  • Miscellaneous fittings, screws, hose mounts, etc.
  • Set of installation diagrams and instructions.
  • Toll Free assistance line for installs or technical support.

DUTY FREE TO CANADA          SIZE OPTIONS              DUTY FREE TO CANADA
SIZE * AMPS@120V SIZE * AMPS@120V
 8 GPH 18 1/2 24 GPH 18 1/2
12 GPH 18 1/2 40 GPH 22 1/2
18 GPH 18 1/2 62 GPH 22 1/2
* The above flow rates are based on a TDS of 36,000 ppm at 78 degrees F.
Flow rates are +/-5%


MISCELLANEOUS OPTIONS
ELECTRIC FLUSH KIT
HIGH PRESSURE WASH DOWN KIT (SALT & FRESH WATER) WITH 25FT. OF 2000 PSI NON MARKING DECK HOSE
12 VOLT D.C. OR 120 VOLT A.C. UV STERILIZER UNIT WITH S/S LINER (FOR SHIP'S TANK)
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS PER CASE OF (30) $60 SAVINGS PER CASE
PORTABLE HAND HELD SALINITY MONITOR
316 STAINLESS STEEL PUMP HEAD (62 GPH MAX.)
ADDITIONAL MEMBRANE MODULE(S) FOR HIGHER PRODUCTION
ELECTRIC AND BELT DRIVE COMBINATION UPGRADE (24 GPH MAX.)




Website and all contents copyright, © 1996-2016, by AquaMarine, Inc. All Rights Reserved
Please review legal terms and conditions of use by clicking here.

PO Box 55, Deer Harbor, WA 98243-0055 USA
Ph: 1-800-376-3091 or (360) 376-3091 fax: (360) 376-3243
All rights reserved.
 

Email us: aqua2133@me.com

 


Most products are sold duty free to Canadian residents.