Logo Banner

Home
R.O. Theory
Our Products
Related Products
Testimonials 
St Roch II Story
Links
Contact Us

 

R.O. WaterMaker Kit to fit on a Westerbeke Genset (4kw-15kw)


Proudly made
in the USA

This kit is designed for direct mounting with stainless steel brackets onto the alternator back end of Westerbeke BC and BT generators. We can work with the 5 KW through 15 KW models. The kit requires moving of the high temp switch on the exhaust elbow to the outboard side. Additionally, the generator control box must also be remotely mounted. While it can be set up for dual belts, this system only requires one belt, leaving an extra sheave for extra accessories: refrigeration, 12 volt alternator, bilge pump, hydraulic pump, etc. Note: It is the purchaser's responsibility to supply a safety belt/pulley guard for this kit.

RO PUMP MODULE          MODULE INSTALLED
Westerbeke Unit       Installed on Westerbeke


KIT CONTENTS

  • Stainless steel mounting bracket complete with hinged belt tension mounting plate for the high pressure pump. Designed to be installed on the electrical end of the generator, requiring remote mounting of the existing genset control box.
  • Stub shaft with support bearing.
  • 12 volt DC clutch, dual or single sheave.
  • Standard high pressure pump with aluminum-nickel bronze (or optional stainless steel upgrade) pump head with lifetime limited warranty to original non-commercial marine purchaser.
  • Dual or single pulley with bushing for high pressure pump.
  • 1000 psi certified filament wound fiberglass RO membrane housing with Super Austenitic stainless steel end plugs, mounting brackets and a lifetime limited warranty to the original non-commercial marine purchaser.
  • Thin film, spiral wound 1000 psi, 50,000 ppm high rejection (99.5%), heavy duty RO membrane(s) including one pound of cruising membrane preservative.
  • Stainless steel control panel including flow meters, hour meter, stainless pressure gauge, stainless manual regulator valve, three-way selector valve, overload circuit breaker, stainless high pressure safety switch and indicator light.
  • Prefilters (5 and 20 micron) with clear housing & stainless mounting brackets, safety low pressure switch and service wrench.
  • 20' nylon lined high pressure hose with reusable fittings.
  • 10' heavy duty white 3/4" reinforced feed water hose and fittings.
  • 15' heavy duty red polyethylene brine water discharge tubing and fittings.
  • 15' FDA approved blue polyethylene product water tubing and fittings.
  • 3/8" inline check valve for product water tubing between TDS valve and storage tank.
  • 12 volt boost pump.
  • Miscellaneous fittings, screws, hose mounts, etc.
  • Set of installation diagrams and instructions.
  • Toll Free assistance line for installs or technical support.

DUTY FREE TO CANADA          SIZE OPTIONS              DUTY FREE TO CANADA
SIZE * KW SIZE * KW
 8 GPH 1 KW 40 GPH 1.5 KW
12 GPH 1 KW 62 GPH 1.5 KW
18 GPH 1 KW 113 GPH 2.6 KW
24 GPH 1 KW 250 GPH 5 KW   
* The above flow rates are based on a TDS of 36,000 ppm at 78°F.
Flow rates are +/-5% Kit prices do not include the genset.

MISCELLANEOUS OPTIONS
ELECTRIC FLUSH KIT
HIGH PRESSURE WASH DOWN KIT (SALT & FRESH WATER) WITH 25FT. OF 2000 PSI NON MARKING DECK HOSE
12 VOLT D.C. OR 120 VOLT A.C. UV STERILIZER UNIT WITH S/S LINER (FOR SHIP'S TANK)
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS PER CASE OF (30) $60 SAVINGS PER CASE
12 VOLT 7" MAGNETIC CLUTCH SINGLE OR DOUBLE SHEAVE (INCLUDED IN ABOVE PRICES).
PANEL MOUNTED AUTOMATIC SALINITY MONITOR & TANK/OVERBOARD VALVE
PORTABLE HAND HELD SALINITY MONITOR
316 STAINLESS STEEL PUMP HEAD (62 GPH MAX.)
HIGH OUTPUT MARINE ALTERNATORS
MOUNTING FOR REFRIG, COMPRESSOR, DIVE COMPRESSOR, HYDRAULIC PUMP, 110 VOLT ALTERNATOR
UPGRADE S/S PANEL FROM 32 GPH TO 62 GPH CAPACITY


Website and all contents copyright, © 1996-2016, by AquaMarine, Inc. All Rights Reserved
Please review legal terms and conditions of use by clicking here.

PO Box 55, Deer Harbor, WA 98243-0055 USA
Ph: 1-800-376-3091 or (360) 376-3091 fax: (360) 376-3243
All rights reserved.
 

Email us: aqua2133@me.com

 


Most products are sold duty free to Canadian residents.